Home > Knowledge > Content

Briefly describe the precautions for the new machine running-in period of the scrap metal baler

Dec 21, 2020

   Scrap metal baler: Mainly used in recycling processing industry and metal smelting industry.


Various metal scraps, steel shavings, scrap steel, scrap iron, scrap copper, scrap aluminum, aluminum shavings, disassembled car shells, waste oil drums and other metal raw materials can be squeezed into rectangular, cylindrical and other shapes of qualified charge . It is convenient for storage, transportation and recycling.


   Notes for the new machine run-in period of the scrap metal baler


   Always keep the body of the scrap metal baler clean, adjust and tighten loose parts in time to prevent aggravated parts wear or loss of parts due to looseness.


  Before using the new waste paper baler, you should always check the lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water) level, and pay attention to check the tightness of the waste metal baler. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended to add grease to the lubrication point during the running-in period.


   Pay attention to frequently check the various instruments of the scrap metal baler equipment, if there is an abnormality, stop in time to eliminate it.


   When the running-in period ceases, the machine should be forced to maintain, check and adjust work, and pay attention to the exchange of oil.


   Pay attention to the workload during the running-in period. The workload during the running-in period should generally not exceed 80% of the rated workload, and appropriate workloads should be deployed to prevent overheating caused by the machine's long-term continuous operation.


   The above is the related matters of the scrap metal baler, I hope it can be helpful to you