Home > Knowledge > Content

Precautions for disassembly and assembly of waste paper baler

Mar 01, 2021

Precautions for disassembly and assembly of waste paper baler: Pay attention to the repair of blades when disassembling the waste paper baler. The damage of the blade is mainly the wear and tear of the contact between the top of the blade and the inner surface of the stator and the relative sliding position of the end surface and the oil distribution plate. If the fuzz is not serious, it can be slightly polished and reused.

1. When disassembling and assembling the waste paper baler vane pump, keep it clean anytime and anywhere to prevent dirt and dust from falling into the pump.

2. In the process of disassembly, assembly and cleaning, cotton yarn and rags should not be used to scrub the parts to avoid mixing the fallen cotton yarn ends into the hydraulic system. Brushes and silk cloth should be used. 3. It is not allowed to use gasoline to clean or soak the rubber sealing ring.

4. The vane pump of the waste paper baler is a precision part. During the disassembly and assembly process, all parts should be handled with care and no knocks. When the waste paper baler is working, the size of the bearing should be selected correctly and its position should be arranged reasonably so that the line of action of the radial force on the cylinder must fall within the length of the bearing roller under any circumstances. In this way, the appearance of "turning moment" is avoided.