Home > Knowledge > Content

Gantry shears are widely used in the recycling of old things

Nov 25, 2020

    Gantry shears are widely used in the packaging and recycling of old gantry shears, plastic gantry shears, etc. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs. Longmen scissors have a wide range of uses, and are widely used in various enterprises such as longmen scissors factories and old object recycling companies.

    Gantry shears are used to squeeze gantry shears and similar products under normal conditions, and are packaged with special packaging tape to greatly reduce the volume, thereby reducing transportation volume, saving freight, and increasing benefits for enterprises. Scissor advantages

   1. It has the characteristics of small size, light weight, low movement inertia, low noise, stable movement and flexible operation.

   2. It has a wide range of applications. It can be used as a packaging equipment for gantry shears, but also as a processing equipment for packaging and compacting similar products.

   3. PLC control, with man-machine interface (touch screen) and inspection type monitoring, synchronous action indicator diagram with error warning, and the length of the block can be set.

   4. The floating necking design in the left, right and upper directions is conducive to automatic distribution of pressure on all sides, and can be widely used for packing different materials.

   5. Automatic strapping to improve the speed of packing.

   6. The pusher cylinder and the pusher head are connected by a spherical structure, which has good reliability and long service life of the oil seal.

   7. The feeding port is equipped with a distributed shearing knife, which has high cutting efficiency.

   8. Low noise hydraulic circuit design, high efficiency and low failure.

   9. Easy to install, no foundation needed.

   10. The structure can be equipped with conveyor belt feeding or manual feeding.

   Maintain the oil filter of the gantry shear

The maintenance of the gantry shears is very important, and it has a lot to do with the service life. How to maintain the oil filter of the gantry shears? A few tricks for everyone

1. It has sufficient oil flow capacity and low pressure loss;

2. The filtration accuracy should meet the design requirements;

3. The filter element has sufficient strength;

4. The filter element has good corrosion resistance and can work for a long time at the specified temperature;

5. It is convenient to replace, clean and maintain the filter element.

The oil filter in the gantry shears hydraulic system can filter out impurities mixed in from the outside; at the same time, the solid impurities produced by the gantry shears hydraulic system during the working process can also be filtered out through the oil filter. This can ensure the plot of the hydraulic oil, extend the service life of the gantry shear hydraulic system, and ensure the normal operation of the gantry shear.