The straw baler can press silage straw, dried corn stalks, various straw scraps, waste plastic film, etc., and bundle them, but automatically pack them into bags.
The following introduces the daily maintenance rules of the automatic straw green storage baler
1. Check whether there is any debris in the conveyor belt that is blocked.
If there is debris, clean it with compressed air to blow away the dust in the guide rail.
2. Before starting the machine, check whether the parts of the strapping machine are in good condition
Whether the screws and nuts of each component are loose, if any, they should be tightened in time. If there is a shortage of nails and caps, notify the repairman to deal with them in time.
3. If an abnormal phenomenon is found during the startup process.
Such as: loud sound, big vibration, peculiar smell, etc. If you can't find it, you should stop the maintenance personnel to deal with it to avoid damage to the parts.
4. Check whether the tool and sliding plate parts are short of oil.
If you did not use the drip irrigation method to add oil, use a small stick to simmer the oil and slowly drip it on the top. The inverted method cannot be poured into the feeding belt, otherwise it will be packed well. The belt will slip.