Home > Knowledge > Content

Remind you to be vigilant about the faults that are easy to occur in the work of waste paper baler!

Jan 08, 2021

Guide: The disassembled parts of the waste paper baler equipment should be placed in wooden racks, wooden boxes or trays in order. The parts are scattered, damaged or rusted due to moisture. In order to avoid confusion during assembly. The disassembly of the waste paper baler should be prepared for the baler assembly. Check the mark and make a mark. Timing gears, crankshafts and flywheels, connecting rods and connecting rod covers, complete sets of processing or optional coupling parts, and other non-interchangeable parts should be marked according to the original position or sequence before disassembly to avoid confusion during assembly . The storage parts should be classified and stored according to the size of the parts and their respective assemblies to avoid mixing.

        The failures that are prone to occur during the work of the automatic waste paper baler are to further inspect the damage of the waste paper baler and remove the damaged parts for repair or replacement. There are 4 sets of feeding devices for the scrap metal baler, each of which corresponds to a baling head. Each set includes a baling line conveying device and a baling line reverse tension device. The main rail seat of the waste paper hydraulic baler is mainly composed of two wear-resistant steel rails on the surface. The wheels of the compression frame are guided to run along the outer sides of the two tracks, and hydraulic cylinders that push the compression frame to run are arranged therein. In addition, there is a complete set of hydraulic stations in addition to mechanical components. It can be seen from the above description that various movements of the waste paper hydraulic baler are completed by fluid power. The automatic waste paper baler is a mechatronic product, mainly composed of mechanical systems, control systems, feeding systems and power systems. The whole packing process consists of auxiliary time such as pressing, returning, carrying, transferring, outgoing up, outgoing down, and receiving. This contributes to the efficiency and service life of the waste paper baler. Let us make a profit!

        Strictly follow the correct disassembly and assembly methods of the waste paper baler, use the disassembly and assembly tools correctly, hit hard to damage the waste paper baler, it is strictly forbidden to use a hammer to hit the working surface of the piece, if you hit it, you can use it Copper or hammer, or a soft pad between the work object and the vertical head. It is not allowed to use measuring tools and files instead of hammers, and use blunderheads and chisel instead of wrenches. From the outside to the inside, from the assembly to the parts and then to the parts, disassemble one by one, and inspect while disassembling.

       The disassembled parts of the waste paper baler equipment should be placed in wooden racks, wooden boxes or trays in order. The parts are scattered, damaged or rusted due to moisture. In order to avoid confusion during assembly. The disassembly of the waste paper baler should be prepared for the baler assembly. Check the mark and make a mark. Timing gears, crankshafts and flywheels, connecting rods and connecting rod covers, complete sets of processing or optional coupling parts, and other non-interchangeable parts should be marked according to the original position or sequence before disassembly to avoid confusion during assembly . The storage parts should be classified and stored according to the size of the parts and their respective assemblies to avoid mixing.

   At this stage, the application of waste paper balers is increasing, and the number of manufacturers using waste paper balers has also increased. The lead frame of the automatic waste paper baler is composed of 4 sets of wire devices installed on a frame. The entire lead frame is suspended on a central axis of the compression frame, and moves horizontally relative to the compression frame under the action of a hydraulic motor. The compression frame is a welded component, and the bottom is equipped with wheels, which can move horizontally along the main slide rail under the push of a hydraulic cylinder. The lifting platform is mainly formed by bolting two horizontal beams, and the lifting platform can move up and down in the vertical direction under the push of two hydraulic cylinders. In the process of using waste paper baler, many companies will encounter such and other problems. Next, the editor will analyze the difficulty of pushing belt of waste paper baler for you.

   First check whether there is any foreign matter in the waste paper baler, and then check whether the screws are loose, which affects the normal transportation of the packing belt. Strictly control the gap of the unwinding belt, generally between 0.5-1.0 cm. Check whether the bearing of the conveyor baler is broken. Improper position of the crossbar can also cause difficulty in unwinding.