The waste paper baler produced by the waste paper baler manufacturer is widely used, but if the maintenance is not in place, there will be some small faults that affect the packaging process. If it is frequent, it is troublesome. So what is the common maintenance method of waste paper baler? Next, let the staff of the waste paper baler manufacturer give you a brief introduction.
1. The waste paper baler manufacturer reminds you that before starting the machine, it is necessary to check whether the components of the baler are intact; whether the screws and nuts of each component are loose, if any, they should be tightened in time. If there is a shortage of nails and caps, the repairman must be notified to deal with them in time.
2. Check if there is any debris clogged in the conveyor belt. If there is debris, it must be cleaned with compressed air to blow away the dust in the guide rail.
3. The waste paper baler manufacturer checks whether the cutters and slide parts are short of oil. If it is not necessary to use the drip irrigation method to add oil, use a small stick to simmer the oil and slowly drip it on the top. The inverted method cannot be poured into the feeding belt, otherwise it will be packed well. The belt will slip.
4. If an abnormal phenomenon is found during the startup process. Such as: loud sound, big vibration, peculiar smell, etc. If you can't find it, you should stop working and have the waste paper baler manufacturer repair personnel to deal with it to avoid damage to the components.
The above is the maintenance method of the waste paper baler organized by the waste paper baler manufacturer for you. When using the waste paper baler, please pay attention to the maintenance of the waste paper baler.