Whether the waste paper hydraulic baler can operate normally should start from the initial installation of the baler, if it is useless to install the waste paper hydraulic baler, then how to talk about normal operation, the following are the points that should be paid attention to when installing the hydraulic baler
1. Refer to the foundation drawing for construction and installation. If the foundation and drawings are incorrect, make adjustments. So as not to affect the normal operation of the equipment after installation.
2. After the host is installed, the level should be adjusted. Its level error is not more than .1mm/m. It can be adjusted with angle iron, iron plate, etc. After adjusting the level, use angle iron, inclined iron and waste paper hydraulic baling machine to weld firmly.
3. The viewing platform and the loading port need to be tight and firm when installed. The welding port needs to be knocked off the welding slag, polished smoothly, and sprayed with anti-rust paint.
4. The imported wires should be buried in plastic pipes or erected at high altitude to prevent high-voltage electric shock. And often check the safety of the circuit, found that the damage and aging need to be dealt with and replaced in time.
5. Inject 46# anti-wear hydraulic oil (add to 8-9% of the tank volume), and filter and replace the hydraulic oil frequently as required.
6. The waste paper hydraulic packaging machinery installed indoors needs to pay attention to ventilation and heat dissipation, and the outdoor installation needs to pay attention to moisture and rain.
The above are the issues that should be paid attention to when installing the waste paper hydraulic baler. I hope it can help you. Thank you for reading.