Home > Knowledge > Content

What should be paid attention to when installing gantry shears?

Nov 12, 2020

   The normal operation of the gantry shears should start from the initial installation of the gantry shears. If the installation of the gantry shears is useless, then what about normal operation? The following are some points that should be paid attention to when installing the gantry shears


   1. Refer to the foundation drawings for construction and installation. If the foundation and drawings are incorrect, make adjustments. So as not to affect the normal operation of the equipment after installation.


   2. After the host is installed, the level should be adjusted. Its level error is not more than 0.1mm/m. It can be adjusted by angle iron, iron plate, etc. After adjusting the level, use angle iron, inclined iron and gantry shears to weld firmly.


   3. The viewing platform and the loading port need to be tight and firm when installed. The welding port needs to be knocked off the welding slag, polished smoothly, and sprayed with anti-rust paint.


   4. The imported wires should be buried in plastic pipes or erected at high altitude to prevent high-voltage electric shock. And often check the safety of the circuit, found that the damage and aging need to be dealt with and replaced in time.


   5. Inject 46# anti-wear hydraulic oil (add to 80-90% of the tank volume), and filter and replace the hydraulic oil frequently as required.


   6. The gantry shears installed indoors need to pay attention to ventilation and heat dissipation, and the outdoor installations need to pay attention to moisture and rain.


   The above are the issues that should be paid attention to when installing the gantry shears. I hope it can help everyone. Thank you for reading.


   Competition of Longmen Scissors Production Base


   As a leader in the gantry scissors industry, Nantong Machinery is a production base specializing in the production of gantry scissors. With the rapid development of my country's economy, the papermaking, textile, plastic processing, and financial container processing industries are also developing rapidly. The traditional industry's demand for gantry scissors has been caused by the vicious competition of gantry scissors, which has led to the participation and share of more and more enterprises in some hydraulic equipment.


   For the quick packaging of products in these industries, the gantry shears are just right in this regard. In the fierce competition, only development is the last word. Gantry shears and gantry shears are widely used for compression and packing of gantry shears, wool, hair balls and other loose objects. The bales have the same dimensions, neatness, high density, and high density. They are suitable for the needs of export products and shipping containers. Compression of gantry shears, waste plastics, wheat, metal containers, etc. The volume is reduced exponentially, the transportation cost is reduced, and the transportation and processing are convenient.


   Gantry shears machinery production equipment has played a positive role in promoting my country's economic development, especially in the recycling industry such as metal and gantry shears. But we should see that compared with our foreign counterparts, we still have a long way to go in terms of R&D and manufacturing of hydraulic presses and gantry shears.