Guide: Check whether there is any foreign matter in the extension of the horizontal waste paper baler. This is to check whether the screws are loose, which affects the normal transportation of the packing belt. Strictly control the gap of the unwinding belt, generally between half a centimeter and one centimeter. Check whether the bearing of the conveyor baler is broken, and the improper position of the crossbar can also cause rare problems with unwinding.
At this stage, the application of horizontal waste paper balers is increasing, and the number of manufacturers using horizontal waste paper balers has also increased. In the process of using the horizontal waste paper baler, many companies will encounter such and other problems. Below we will have the personnel analyze the difficult problem of the horizontal waste paper baler;
Inspect whether there are foreign objects in the extension of the horizontal waste paper baler. This is to check whether the screws are loose, which affects the normal transportation of the packing belt. The lead frame of the automatic waste paper baler is composed of 4 sets of wire devices installed on a frame. The entire lead frame is suspended on a central axis of the compression frame, and moves horizontally relative to the compression frame under the action of a hydraulic motor. The compression frame is a welded component, and the bottom is equipped with wheels, which can move horizontally along the main slide rail under the push of a hydraulic cylinder. The lifting platform is mainly formed by bolting two horizontal beams, and the lifting platform can move up and down in the vertical direction under the push of two hydraulic cylinders. Strictly control the gap of the unwinding belt, generally between half a centimeter and one centimeter. Check whether the bearing of the conveyor baler is broken, and the improper position of the crossbar can also cause rare problems with unwinding.
The principle of selecting the hydraulic pump for the manufacturer of the automatic horizontal waste paper baler is: according to the working conditions of the main machine of the horizontal waste paper baler, the size of the power and the performance requirements of the system, the type of hydraulic pump, and then the pressure required by the system , The flow rate and its specifications and models. The structure of the compression frame of the mineral water bottle packing machine is basically similar to that of the compression frame, but there are 4 packing heads and 1 set of thread feeding device arranged on it. The packing heads of the waste paper hydraulic baler (4 in total) are the most complicated parts of the whole equipment and the most chained actions. The packing heads of each hydraulic waste paper baler have exactly the same structure and can be interchanged. The automatic waste paper baler is a mechatronic product, mainly composed of mechanical systems, control systems, feeding systems and power systems. The whole packing process consists of auxiliary time such as pressing, returning, carrying, transferring, outgoing up, outgoing down, and receiving.
Generally, gear pumps and double-acting vane pumps can be selected for light-load and low-power hydraulic equipment; mechanical equipment with higher precision (precision) (small waste paper baler) can be used with double-acting vane pumps and incandescent rod pumps; For mechanical equipment (horizontal waste paper baler) with large load and fast and slow feed, automatic baler manufacturers can choose pressure-limiting variable vane pump and double vane pump; equipment with large load and high power (Waste paper baler), plunger pump can be used; mechanical equipment, such as feeding, clamping and other unimportant occasions, can choose low-cost gear pump.