Home > News > Content

A Comprehensive Introduction To The Professional Beverage Bottle Hydraulic Baler

Nov 19, 2020

    Equipment wear and tear of various beverage bottle packing machines


   The beverage bottle packing machine is well-made and equipped with advanced equipment. I will discuss with you the wear and tear of various beverage bottle packing machines.


   1. Normal wear and tear. The wear and tear of the beverage bottle packing machine within the allowable limit specified in the design becomes the normal wear and tear of the beverage bottle packing machine. This kind of wear is generally in the initial stage. Because the new friction surface has a certain roughness, the real contact surface is small, and the wear is faster. This is the so-called run-and-match phase. As the surface is gradually flattened and the real contact area increases, the beverage bottle packer gradually enters a normal and stable wear stage. The friction surface wears slightly and slowly and stably.


   2. Adhesive wear. This kind of wear refers to the phenomenon that the material of the contact surface transfers from one surface to another surface due to solid phase welding at the real contact point, which is called adhesive wear. When solid phase welding occurs in the beverage bottle packaging machine, the temperature at the real contact point may or may not exceed the melting point.


   How to buy a good beverage bottle packing machine


   Beverage bottle balers are widely used in the market, and they are also relatively common packaging equipment. There are certain skills to purchase excellent beverage bottle balers. Nowadays, there are some problems that often exist in the beverage bottle packing machine in the market. I hope you will pay attention to it when purchasing to see if there is a similar situation.


   1. Generally, the tightening force of the beverage bottle packer on the market does not meet the standard requirements


   The standard stipulates that when the width of the beverage bottle balers is 13.5mm, the single lane has a large tightening force of 250N, and the width is lt; when the width is 13.5mm, the single lane has a large tightening force of 200N. The single lane of the beverage bottle balers is 700N. Beverage bottle packing machine has the difference between a beverage bottle packing machine and a beverage bottle packing machine. Our customers can take a look at the beverage bottle packing machine and see how our strapping force is;


   2. The power supply of the beverage bottle packing machine is unstable


   The standard stipulates that when the deviation between the power supply voltage and the rated voltage does not exceed -10% and +5%, the machine should work normally, but some beverage bottle packers on the market cannot work normally when the power supply voltage fluctuates, especially under low voltage waves. There is a downtime. Therefore, when our customers buy a beverage bottle packing machine, we should pay attention to the fact that the power supply of the beverage bottle packing machine must confirm the phases of the machine. We should also pay attention to the installation to prevent accidents.


   3. The assembly quality of the beverage bottle packing machine is not good enough


   The assembly quality of some beverage bottle balers is not good enough, resulting in loud noises and abnormal noise during operation, and it is prone to jamming. Some people think that the production of beverage bottle balers is very simple, and the accessories are simply organized.


   As there are more and more various beverage bottle packing machines on the market, we will definitely be affected when purchasing beverage bottle packing machines. Beverage bottle packing machines are the packing equipment purchased by customers, so we must choose excellent ones. Beverage bottle balers can better complete the packaging work and avoid damage to the work. Nantong Machinery is a professional manufacturer of beverage bottle balers. You are welcome to visit it on the spot.


   What has promoted the development process of beverage bottle packing machine


   Building an energy-saving and environmentally friendly society is the theme of the current era. The concept of environmental protection has been deeply rooted in the hearts of the people. Under this situation, the beverage bottle packaging machine came into being. It can be said that environmental protection actions have promoted the development of beverage bottle packaging machines. Jia Machinery Technology conducts detailed analysis


   First of all, with the rapid development of social economy, cartons have been widely used in our lives, so waste cartons can be packaged with a beverage bottle packer to save transportation costs and promote reuse.


   Secondly, as far as the beverage bottle packing machine itself is concerned, the machine uses hydraulic components such as hydraulic cylinders, which has the advantages of no noise and pollution during the working process, and meets various environmental protection requirements.


   From a macro perspective, the beverage bottle packing machine not only solves the processing problems of beverage bottle packing case and beverage bottle packing machine, but also keeps up with the development of the times and meets the needs of the times.


   Environmental protection actions have promoted the development of beverage bottle packers. With the increasing awareness of environmental protection, beverage bottle packers have played a big role.


   Some basic troubleshooting methods for the conveyor belt of beverage bottle packing machine


   The beverage bottle packing machine is simple to operate and has complete models. Today, I teach some solutions to the failure of the beverage bottle packing machine packing conveyor belt.


   Check whether the machine is working normally except for automatic tape feeding. If there are no malfunctions in other parts, it is likely that there is a problem with the potentiometer. Potentiometer, on the front of the beverage bottle packing machine, there are a total of four buttons on the operation panel, from left to right are the power switch, potentiometer, reset button, and belt feed button.


   The potentiometer of the beverage bottle packing machine is a rotary button with a scale around it, which is used to control the length of the automatic belt after the packing is completed. If there is more than one tape sending and the automatic sending tape is no problem, it is mostly caused by a potentiometer malfunction.


   The debugging method, turn the potentiometer to a small scale, and then fine-tune, the machine can feed the tape normally within a range. If the delivery of the tape is normal in a certain section of the beverage bottle packing machine, it is certain that the potentiometer is faulty. The next step is to replace the potentiometer. It is recommended to use a precise control potentiometer.


   1. Use a small screwdriver to remove the small screw fixed on the black knob, and remove the black knob.


   2. Unscrew the fixing screw and pull out the potentiometer from the inside. It can be seen that the potentiometer has three outlet positions, two of which are connected to the computer board, and the other is open.


   3. Remember the wiring sequence and remove the potentiometer with a soldering iron. Then replace the new potentiometer.


   4. Reinstall the potentiometer again.