The automatic waste paper baler has the characteristics of good rigidity, toughness and stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment basic engineering. It is widely used in all kinds of waste paper factories, waste recycling companies and other units and enterprises. It is suitable for the packaging and recycling of waste paper, plastic straw, etc. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs. The automatic waste paper baler is widely used, but if the maintenance is not in place, there will be some minor faults that affect the packing process. If it is frequent, it is very noisy. So what are the common maintenance methods for the automatic waste paper baler? The following is an introduction to the use and maintenance of the baler.
1. Before starting the machine, check whether the components of the packer are in good condition; whether the screws and nuts of each component are loose, and if so, they should be tightened in time. If there are missing nails and caps, the repairer must be notified to deal with it in time.
2. Check whether there is any blockage in the conveyor belt. If there is any debris, use compressed air to blow off the dust in the rail.
3. Check whether the knife set and the sliding plate are short of oil. If they are lacking, use the dipping method to refuel. Use a small stick to dip the oil and slowly drip on it. It cannot flow into the belt conveyor in an inverted way, otherwise pack it. The belt will slip.
4. If an abnormal phenomenon is found during the boot process. Such as: loud sound, strong vibration, peculiar smell, etc. If you can't find it by yourself, you should stop the machine and notify the repairer to deal with it to avoid damage to the parts.
The above four points are the maintenance methods of the automatic waste paper baler. When using the waste paper baler, pay attention to the maintenance of the waste paper baler.