Home > News > Content

Because Some Things Are Not Easy To Compress, So I Use An Automatic Waste Paper Baler To Help

Oct 20, 2020

Because some things are not easy to compress, so I use an automatic waste paper baler to help


       Because some things are not easy to compress, so I use an automatic waste paper baler to help. Continuous improvement of the equipment performance of the fully automatic waste paper baler can meet the market development needs. Although the development time of the fully automatic waste paper baler industry is not too long, due to its application and market support, in just a few years, Progress has been made, and the types and fields of its application have been explored. In order to further develop the waste paper baler industry, reform and broaden the market is the way


       The automatic waste paper baler equipment is used to pack waste paper, in order to pack loose waste into bundles to reduce the space occupied. The automatic waste paper baler is a mechatronic product, mainly composed of mechanical systems, control systems, feeding systems and power systems. The whole packing process consists of auxiliary time such as pressing, returning, carrying, transferring, outgoing up, outgoing down, and receiving. The lead frame of the automatic waste paper baler is composed of 4 sets of wire devices installed on a frame . The entire lead frame is suspended on an intermediate shaft of the compression frame and moves horizontally relative to the compression frame under the action of a hydraulic motor. The compression frame is a welded component, and the bottom is equipped with wheels, which can move horizontally along the main slide rail under the push of a hydraulic cylinder. The lifting platform is mainly formed by bolting two horizontal beams, and the lifting pl atform can move up and down in the vertical direction under the push of two hydraulic cylinders.


       When the automatic waste paper baler equipment is in use, remember not to put your hands directly on the heating plate, that is not possible. The lead frame of the automatic waste paper baler is composed of 4 sets of wire devices installed on a frame. The entire lead frame is suspended on an intermediate shaft of the compression frame and moves horizontally relative to the compression frame under the action of a hydraulic motor. The compression frame is a welded component with wheels at the bottom, which can move horizontally along the main slide rail under the push of a hydraulic cylinder. The lifting platform is mainly formed by bolting two horizontal beams, and the lifting platform can move up and down in the vertical direction under the push of two hydraulic cylinders. Because the temperature is sometimes difficult to figure out, so as to avoid the situation. Do not change the components of the waste paper baler casually, in order to prevent the waste paper baler from malfunctionin g. Do not wash with water either, because the waste paper baler is connected to the power supply, if there is water and it is not dried, it will conduct electricity and it is also dangerous. When using it, confirm the machine and then connect it to the power source. Do not connect the wrong power source to cause a failure. But we all know that as the market changes, the time interval for new equipment replacement is gradually shortening, because the waste paper baler must always be vigilant, continue to learn knowledge, always be prepared for improvement, and learn to adapt to the market environment. In order to serve the public and promote social development. The waste paper baler also plays an important role in the development of modern economy.