Home > News > Content

Check If There Are Any Debris Clogged In The Waste Paper Baler Conveyor Belt

Dec 16, 2020

With the increasing awareness of environmental protection, waste paper balers have played a great role. Some waste paper can be reused, and it is becoming more and more accepted by everyone. Domestic waste paper balers have been constantly innovating , Constantly following the development of some foreign advanced technologies.

   1. Check if there is any debris in the conveyor belt that is blocked. If there is debris, clean it with compressed air to blow away the dust in the guide rail.

  2. Before starting the machine, check whether the components of the strapping machine are intact; whether the screws and nuts of each component are loose, if any, they should be tightened in time. If there is a shortage of nails and caps, notify the repairman to deal with them in time.

   3. If an abnormal phenomenon is found during the startup process. Such as: loud sound, big vibration, peculiar smell, etc. If you can't find it, you should stop the maintenance personnel to deal with it to avoid damage to the components.

   4. Check whether the tool and sliding plate parts are short of oil. If you don’t use drip irrigation to add oil, use a small stick to simmer the oil and slowly drip it on top. The inverted method cannot be poured into the feeding belt, otherwise it will be packed well. The belt will slip.