Home > News > Content

Daily Maintenance Rules For Automatic Waste Paper Baler

Nov 05, 2020

1. Before starting the machine, it is necessary to check whether the parts of the strapping machine are intact; whether the screws and nuts of each part are loose, if any, they should be tightened in time. If there is a shortage of nails and caps, the repairman must be notified to deal with them in time.


2. Check if there is any debris clogged in the conveyor belt. If there is debris, it must be cleaned with compressed air to blow away the dust in the guide rail.


3. Check whether the tool and slide parts are short of oil. If it is not necessary to use the drip irrigation method to add oil, use a small stick to simmer the oil and slowly drip it on the top. The inverted method cannot be poured into the feeding belt, otherwise it will be packed well. The belt will slip.


4. If an abnormal phenomenon is found during the startup process. Such as: loud sound, big vibration, peculiar smell, etc. If you can't find it, you should stop the maintenance personnel to deal with it to avoid damage to the components.


Four points are the maintenance methods of the automatic waste paper baler. When using the waste paper baler, please pay attention to the maintenance of the waste paper baler.


The automatic waste paper baler has the characteristics of good toughness, good stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment infrastructure engineering. It is widely used in various waste paper factories, old material recycling companies and other enterprises. Suitable for packaging and recycling of old waste paper and plastic straws. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs. The automatic waste paper baler is widely used, but if the maintenance is not in place, there will be some small faults that affect the packaging process.