Home > News > Content

How Much Do You Know About The Correct Operating Procedures Of Waste Paper Baler?

Oct 16, 2020

      Nantong Cotton Machinery has established a complete and effective service system and built an experienced service team, which not only provides customers with free site planning, design and installation basic drawings and flowcharts, provides professional technical training, but also sends technicians on-site guidance Install and debug equipment. Today Shengda Machinery will tell you the operating procedures of waste paper baler:

The correct operation method of waste paper baler:

       1. Do not change the parts on the machine at will;


       2. Remember to unplug the power when the machine is not in use;


       3. Do not pass your head and hands through the track of the belt during operation; do not directly touch the heating film with your hands;


       4. Before using the waste paper baler, please confirm the power supply used by the machine and do not plug in the wrong power supply;


       5. Do not stick oil on the surface of the conveyor roller; the main parts of the baler should be lubricated with oil frequently.


       6. Do not wash the machine with water. When the workplace is wet, operators should not work barefoot;


       7. When the machine is not in use, please rewind the tape in the storage bin to the reel to avoid deformation during the next use.


       The repair of waste paper baler is a comprehensive process activity that is far more complicated than maintenance technology. When repairing, it requires workers to be familiar with and proficient in operating vehicles, pliers, planing, grinding, plating, and researching process skills, so Repairing waste paper baler is a comprehensive labor requiring considerable intelligence and skills.


       In theory, we must first grasp the working principle and specific structure of the hydraulic pump. In experience, we must correctly judge the internal and external causes of the damage and reasonably determine the repair methods and measures. The two repair methods of the hydraulic baler:


Repair and replacement:

1. Repair:

       Repair methods to compensate the shape and size of parts by welding, repairing, plating, turning, grinding, grinding, etc., to meet the original accuracy and sealing performance requirements. In general, repairing is better than manufacturing new parts It takes less work. Therefore, it is usually more economical in terms of time and cost to adopt repair methods under the conditions of the structure or work performance of the hydraulic baler parts.


2. Replace:

       If you feel that the damaged parts of the hydraulic baler have no repair value or are technically difficult to repair, and spare parts are available, you should not hesitate to replace them. Replacement of new parts can usually shorten the repair cycle, generally for vulnerable parts , Take more replacement methods.

Waste paper baler


Precautions for the use of waste paper baler:

       1. Please confirm the power supply used by the machine. Don't insert the wrong power supply. This machine adopts a three-phase four-wire system, and the flower line is a grounded neutral line for leakage protection.

       2. Do not cross the track with your head and hands during operation.

       3. Do not touch the heating plate directly with your hands.

       4. Do not wash the machine with water. When the workplace is wet, operators should not work barefoot.

       5. When the machine is not in use, please rewind the tape in the storage bin to the reel to avoid deformation during the next use.

       6. Do not stick oil on the surface of the conveyor roller.

       7. Remember to unplug the power when the machine is not in use.

       8. Do not change the parts on the machine at will.

       9. The main parts should be lubricated with oil frequently.


       The battery of the waste paper baler is one of the more easily broken parts. We cannot neglect the question of the battery of the waste paper baler. Why? Because it is the power source of the waste paper baler, but the battery of the waste paper baler The mobile phone battery has the same service life. Although the service life will be longer, there is no guarantee that there will be no shortcomings during use. Here are a few of them:


       1. The tightness of the waste paper baler is not strong. Generally, when the battery loses power and has reached the end of its service life, it will appear that the bundle is not tight. At this time, the user can take another battery and try it in the past. If it can be used, it is not a question of the waste paper baler, but Questions about the battery.

       2. The indicator light is off. There are two reasons why the indicator light is not bright, one is the defect of the indicator light, and the other is naturally the defect of the battery.

       3. Motor rolling is sluggish. The rolling of the motor of the waste paper baler during the incident is very powerful. Assuming that the waste paper baler flashes a low sound during the use process, then the general environment is the battery shortcoming, either it is lack of electricity, or the service life is reached. , The battery can no longer hold power, which constitutes an abnormal incident.


       Relying on years of production experience and operating principles of honesty, the company always maintains its competitiveness in the fierce market competition and realizes its rapid and stable development. Shengda Machinery is willing to be your trusted long-term partner.