Home > News > Content

How To Clean The Waste Paper Baler

Sep 17, 2020

How to clean the waste paper baler

       The cleaning of the hydraulic system inside the waste paper baler is often useful for the right or wrong baler, because the waste paper baler needs an outstanding hydraulic system when it works. Therefore, in daily work, the cleaning of the baler should not be underestimated and must be taken seriously. Below, let's take a look at the precautions for cleaning the waste paper baler:


      Firstly, use low-viscosity special cleaning oil. When cleaning, add the oil to the oil tank of the straw baler and heat it to 50-80 degrees Celsius. Start the hydraulic pump and let it run dry. When cleaning, you should often tap the tube gently. The intention of this is to remove the attachments. Clean the oil filter for 20 minutes to check the contamination of the oil filter, and clean the filter, then clean it again, and repeat until it is filtered. Stop when there are not many pollutants online. The cleaning time of waste paper baler is usually 2 hours. For the messy hydraulic system, each area can be cleaned according to the working area. The hydraulic cylinder can also be connected to allow the hydraulic cylinder to reciprocate for system cleaning.

     After cleaning, the cleaning oil must be as much as possible. The cleaning of the hydraulic system inside the waste paper baler is often effective for the baler, because the waste paper baler needs an outstanding hydraulic system when it works. Therefore, in daily work, the cleaning of the baler should not be underestimated and must be taken seriously.