The baler is mainly composed of belt feeding, belt unwinding, joint connection cutting device, transmission system, track frame and control device.
Matters needing attention in the operation of the plastic bottle packing machine:
1. When we remove the upper panel, we must first cut off the power switch, unplug the power supply, and then repair and adjust the machine.
2. It is forbidden to put your hands or head into the frame during the operation of the machine. If you put your head or hands into the frame, it will cause damage to the body of the packer.
3. Pay attention to some matters when using electrical components, such as turning off the power switch and unplugging the power plug when repairing or adjusting the metal baler. When the power is turned on, touching the electronic control box and transformer by hand will cause electric shock. . In addition, the external insulation is damaged, and contact with the body may cause an electric shock accident, which is very dangerous.
4. Regarding the heater, if the heater is in a high temperature state (about 230 degrees), if you touch it directly with your hands, you will get burned. After cutting off the power, we have to cool down for a period of time before returning to normal temperature.