my country's waste paper balers are constantly innovating and developing new technologies under the influence of foreign countries. In use, pay attention to the entry of moisture, because this will affect the normal use of the waste paper baler and reduce the performance of the machine. The moisture here refers to the influence of cooling water and steam around it. The poor production efficiency of waste paper baler will have a very negative impact and cause inconvenience to everyone. The following editor summarizes the reasons for the poor production efficiency of the equipment.
1. The quality of the hydraulic oil selected for the waste paper baler, which directly determines whether the cylinder can play a large role, but also directly affects the failure rate and service life of the cylinder. To ensure the production of waste paper baler, high-quality and genuine No. 46 anti-wear hydraulic oil must be used. The production efficiency of waste paper baler is directly influential: the type and specifications of the baler, the output varies from model to model, and the difference in specifications directly determines the production efficiency of the baler. The production efficiency of the conventional waste paper baler is higher than that of the equipment with a door at the discharge port.
2. The production of waste paper baler is also inseparable from the performance of the oil cylinder, which determines the stability of the waste paper baler. To ensure the production performance of the product, you must choose a manufacturer with exquisite cylinder production technology. The inner and outer chains of the waste paper baler chain are kept lubricated, and mechanical oil is added. When the film frame moves up and down and shakes, it can be eliminated by tensioning the chain. When the turntable slows down or slips, open the turntable motor cover, loosen the four connecting bolts on the speed reduction mounting plate, and then evenly adjust the two tension bolts clockwise to achieve the required tension, and tighten the four connecting bolts. The electrical cabinet should be closed, and the electrical components and electrical connections should be regularly cleaned and checked to ensure the normal use of the equipment. The goods shall not exceed the designed packaging height, otherwise, the packaging effect will be affected.
3. The operating convenience, control performance and low failure rate of the waste paper baler control system also determine the efficiency of the baling operation.