1. The box part of the machine is equipped with an oil gauge. You should refuel it all at once before starting up. It can be added in the middle according to the temperature rise and operating conditions of each bearing.
2. The automatic hydraulic baler must store the oil for a long time. The oil level is high enough for the worm gear to invade the oil. If it is used frequently, the oil must be replaced every three months. There is an oil plug at the bottom for draining oil.
3. When refueling the hydraulic baler, do not let the oil spill out of the cup, let alone flow around the machine and on the ground. Because oil easily pollutes materials and affects product quality.