Home > News > Content

Precautions For Reusing Oil In Automatic Waste Paper Baler

Oct 23, 2020

      Regarding the oil leakage of the automatic waste paper baler, which plagues the majority of user groups, how do we solve the problem of oil used in the automatic waste paper baler? Next, let’s take a look at the oil used by the fully automatic waste paper baler. What should I pay attention to?


  (1) The oil leakage of the waste paper baler is relatively severe. If the pressure of the oil pump is adjusted too high, the wear of the movable parts will increase the sealing gap, the sealing device will be damaged, the viscosity of the oil used in the waste paper baler is too low, etc., and the city will increase leakage. After clarifying the reason, adopt the corresponding steps to eliminate it.


(2) Poor heat dissipation, insufficient heat dissipation area of the fuel tank, too little oil storage in the fuel tank, resulting in too fast oil circulation, poor cooling of the waste paper packer cooler, such as failure of cooling water supply or failure of electric fans, and the ambient temperature is relatively high Higher is the cause of poor heat dissipation.


(3) The system does not have an unloading circuit or the unloading circuit does not perform well. When the waste paper baler system does not need to pressurize the oil, the oil is still overflowing to the tank or unloading under the working pressure set by the overflow valve The higher pressure environment downstream returns to the tank. It is necessary to check whether the unloading circuit is normal or not, and adopt the corresponding steps to eliminate it.


   (4) Misuse of oil with too high viscosity, the waste paper baler caused excessive hydraulic loss.