To prevent the troubles that are easy to occur in the work of the waste paper baler, in order to further check the damage of the internal parts of the waste paper baler, and remove the damaged parts for repair or replacement. This contributes to the efficiency and service life of the waste paper baler.
Strictly observe the correct disassembly and assembly methods of the waste paper baler; use appropriate disassembly and assembly tools correctly to avoid damaging the waste paper baler by violently hitting. It is strictly forbidden to use a hammer to hit the working surface of the part, if it must be knocked When hitting, you can use a copper or lead hammer, or add a soft liner between the work and the hammer; it is not allowed to use measuring tools or knives instead of hammers, and use blunderheads and chisel instead of wrenches. From the outside to the inside, from the assembly to the components, and then to the parts, disassemble step by step, disassembling and inspecting.
The disassembled parts of the waste paper baler equipment should be placed in the wooden frame and wooden box into the parts tray in order to prevent the parts from being scattered, damaged or rusted due to moisture. So as to avoid confusion during assembly.
The disassembly of the waste paper baler should be prepared for the baler assembly. Check the mark. Timing gears, crankshafts and flywheels, connecting rods and connecting rod covers, complete sets of processing or optional coupling parts, and other non-interchangeable parts should be marked in the original position or sequence before disassembly to avoid confusion during assembly. Store parts separately. Classified and stored according to the size, precision, and assembly of the parts to avoid mixing or damage.