Home > News > Content

Small Problems That Often Appear In The Process Of Using The Baler

Dec 18, 2020

Straw balers are widely used in various types of straw balers, waste paper factories, waste recycling companies and other units and enterprises. They are suitable for the packaging and recycling of waste paper, plastic straw, etc., which improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation. Cost-effective equipment.


  In the process of using the baler, there are often the following minor problems:


   1. The length of the belt is too long.


   Straw baler is mainly suitable for steel mills, recovery processing occupations and non-ferrous and ferrous metal training occupations.


  The straw baler can knead all kinds of metal scraps into qualified furnace materials of various shapes such as cuboid, octagon, cylinder, etc., which can reduce the transportation and training cost and increase the furnace casting speed.


  2, cassette.


   Use of straw balers: ZJC straw balers can be used for various non-metallic compaction balers. Such as: cardboard, carton, shredded paper, cotton yarn, wool ball, plastic, grass and wood, sponge, wool, loose fiber, clothing, cloth, tobacco, plastic and other light foam and loose materials.


The main performance of this kind of cassette is that after the packing process is completed, the belt cannot be ejected from the belt groove of the baler. The main reason for this situation is that the upper slide plate is too tight and inflexible, and the belt cannot be very smooth after the baler is completed. Pop up.


   3. Cut the straps continuously.


   This situation is a problem that often occurs with balers. There are two main reasons for this situation. One is that the cutters of the balers are severely worn and need to be replaced. The other reason is that the straps are too thin.


In general, we advocate using the corresponding straps in cooperation with what kind of strapping machine to use. Generally, the straw strapping machine advocates the use of semi-active straps. If the user uses active straps, it is simple because of its better quality and stronger durability. Presents the condition of being constantly strapped.