The recycling and utilization of waste paper is a measure to reduce resource waste and greatly increase production efficiency in our country. Before the horizontal waste paper baler packs waste paper, the waste paper must be sorted, processed, and deinked before it can be packaged. If the waste paper recycling process is not strictly sorted. This results in the mixing of different types and grades of waste paper. In this way, it is difficult for paper mills to produce different products and use different types of waste paper, which affects the quality of waste paper recycled pulp and increases costs; at the same time, the ability of the horizontal waste paper baler production process cannot be brought into full play. For horizontal waste paper baler raw material purchasers, there are few waste paper warehouses during the storage and custody of waste paper, and they are generally stacked in the open air, which can easily cause the quality of waste paper to decrease due to the sun and increase the loss. In one case, one month’s open storage would cost 5% of the loss, and storage for more than two months would cost about 8%. The loss caused by improper storage and storage is generally passed on to the paper mill by the purchaser.
Horizontal waste paper baler According to some large-scale waste paper deinking production lines in my country in recent years, most of the waste paper production enterprises still have the main problems of small production scale, poor technical equipment, and low product quality. The small production scale and low labor productivity will directly affect the economic benefits of enterprises. Since most small factories have stopped chemical pulp production due to environmental pollution and switched to waste paper. Due to the shortage of funds, these small factories can only choose technology, equipment, and procedures simply because they can’t produce different types of paper and cardboard. The technological process of waste paper recycling requires to optimize the equipment level, which affects the output and quality of waste paper recycled pulp by the horizontal waste paper baler. At the same time, due to the constraints of unfavorable factors such as low quality of recycled waste paper, unreasonable production process, poor equipment, and small scale, most of the products produced from waste paper pulp are still in the middle and low-grade cardboard, The market competitiveness of packaging paper and toilet paper is not strong.
The horizontal waste paper baler has not been well promoted and applied for the development and utilization of waste paper raw materials in the field of new technologies, new processes, new additives, and new equipment. It is satisfied with the status quo, and it also affects the waste paper pulp to a certain extent. The improvement of quality and the expansion of the scope of use.