In order for the vacuum pump of the hydraulic baler to work normally, the vacuum pump motor is not allowed to reverse. The oil level should be checked frequently. The normal oil level is 1/2-3/4 of the oil window (not over). When there is water in the vacuum pump or the oil color turns black, the oil should be changed at this time
1. The hydraulic baler should be used in an environment where the temperature is -10℃-50℃, the relative humidity is not more than 85%, and there is no corrosive corrosive gas in the surrounding air, and no dust. Like the packer and shrink machine, this hydraulic packer is a three-phase 380V power supply.
2. For the vacuum pump of the hydraulic baler to work normally, the vacuum pump motor is not allowed to reverse. The oil level should be checked frequently. The normal oil level is 1/2-3/4 of the oil window (not over). When there is water in the vacuum pump or the oil color turns black, the oil should be changed at this time (usually one or two continuous work Monthly).
3. The impurity filter should be removed and washed frequently (generally 1-2 months to clean, such as packaging debris objects should shorten the cleaning time). There are 4 sets of feeding devices for the scrap metal baler, each of which corresponds to a baling head. Each set includes a baling line conveying device and a baling line reverse tension device. The main rail seat of the waste paper hydraulic baler is mainly composed of two wear-resistant steel rails on the surface. The wheels of the compression frame are guided to run along the outer sides of the two tracks, and hydraulic cylinders that push the compression frame to operate are arranged in them. In addition, there is a complete set of hydraulic stations in addition to mechanical components. It can be seen from the above description that various movements of the waste paper hydraulic baler are completed by fluid power.
4. After working continuously for 2-3 months, the back cover 30 should be opened to lubricate the sliding parts and the switch bumps, and the connection activities on the heating rod should be lubricated according to the usage.
5. Frequently check the decompression, filtration, and oil mist triple parts 24. There is oil in the oil mist and oil cup (sewing machine oil), and there is no water in the filter cup.
6. The heating strips and silica gel strips should be kept clean, and no foreign matter should be stuck, so as not to affect the sealing quality.
7. The second layer of adhesive paste on the heating rod and under the heating plate acts as a margin. When it is damaged, it should be replaced in time to avoid short circuit. Mineral water bottle packing machine This product has the characteristics of good rigidity, toughness and stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment basic engineering. It is widely used in all kinds of waste paper factories, waste recycling companies and other units and enterprises. It is suitable for the packaging and recycling of waste paper, plastic straw, etc. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs.
8. The user prepares the working air source and inflation air source. The working pressure of the hydraulic baler has been set to 0.3MPa, and the situation should not be adjusted too much.
9. The hydraulic baler is not allowed to be tilted during the handling process, and it cannot be placed down for handling. The structure of the compression frame of the mineral water bottle packing machine is basically similar to that of the compression frame, but there are 4 packing heads and 1 set of thread feeding device arranged on it. The packing heads of the waste paper hydraulic baler (4 in total) are the most complicated parts of the whole equipment and the most chained actions. The packing heads of each waste paper hydraulic baler have exactly the same structure and can be interchanged.
10. The hydraulic baler must have a grounding device during installation.