Home > News > Content

The Reasons Why The Waste Paper Baler Cannot Be Started

Feb 02, 2021

The reasons why the waste paper baler cannot be started are: the power is not turned on; the fuse is blown; the overload maintenance action; the control equipment wiring error. The reason for the intense oscillation of the waste paper baler motor is that the motor is inconsistent with the mechanical center it drives; the coupling is lost; the unit is out of balance and the foundation is not strong, and the rotor is equipped with a touch broom. It is very important to grasp the common faults of the waste paper baler motor and check the repair methods. The normal use of the baler equipment is very important.


   The large allowable pressure of the waste paper baler under the condition of exceeding the additional pressure. According to the test specification, the large pressure value of the hydraulic pump that allows the waste paper baler to run for a short time is called the large allowable pressure. Each rotation of the hydraulic pump, the volume of the discharged liquid calculated by the change of the sealing volume of the waste paper baler is called the displacement of the hydraulic pump, the hydraulic pump with adjustable displacement is called the variable pump; the hydraulic with stable displacement The pump is a type called metering pump.


   Working pressure of waste paper baler The output pressure of the hydraulic pump of waste paper baler is actually called working pressure. Regardless of the flow rate of the hydraulic pump, the size of the operating pressure depends on the size of the external load and the pressure loss on the discharge line. Extra pressure of waste paper According to the test specification, the hydraulic pump of the waste paper baler is called the extra pressure of the hydraulic pump under normal operating conditions.


   Because of the different uses of the hydraulic drive of the waste paper baler, the pressure required by the system is also different. If this value is exceeded, the pump will be overloaded, and the additional pressure will be restricted by the structural strength and leakage of the pump itself. In order to facilitate the planning, production and use of hydraulic components of the waste paper baler, the pressure is divided into several levels.