Home > News > Content

​Things To Pay Attention To When Using Horizontal Waste Paper Baler

Dec 21, 2020

   Waste paper baler is a mechatronic product, mainly composed of mechanical system, control system, feeding system and power system. The whole packing process consists of auxiliary time such as pressing, returning, carrying, transferring, outgoing up, outgoing down, and receiving.


  When using the horizontal waste paper baler, you only need to pay attention to these to avoid the maintenance of the fuselage


   1. After the above, the equipment enters the whole process of rewinding, tightening, cutting, and lap welding, and automatically inputs the abnormal length of the strap for the next operation and control.


      2. When the machine is finished, we must remember to close the main power supply, and stop the protection of the machine body according to the requirements. The hydraulic horizontal waste paper baler is suitable for steel mills, crop straws, recovery processing occupations and non-ferrous, Ferrous metal training professional waste paper horizontal waste paper baler has outstanding rigidity, toughness and volatility, beautiful and stingy, convenient operation and repair, safe and energy-saving, and high investment costs for equipment basic engineering.


  It is widely used in all kinds of waste paper factories, old waste recycling companies and other units and enterprises. It is suitable for packaging and recycling old waste paper, plastic straw, etc. It is a good equipment to advance rest power, increase rest intensity, waste manpower, and reduce transportation costs.


  3. When the machine does not stop the packing operation after 3 minutes, the equipment will take the initiative to time off the power to avoid accidents and make a contribution to power saving.


      4. The temperature of the heater of the horizontal waste paper baler can be stopped by the internal temperature scheduler. When entering the field, it is generally scheduled on the shape scale "4". When in use, it is not ideal because of various reasons. At time, we can stop the proper scheduling of the horizontal waste paper baler. The metal briquetting machine can directly cold-press powdered cast iron, steel, copper, aluminum, mineral powder, etc. into cakes for storage and transportation. And put it back into the furnace for reuse.


   The loss of operation after being put into the furnace after being restricted into blocks is extremely low. The entire production process does not require heating, additives or other processes, and is directly cold-formed, and the molding also ensures that the original raw materials remain unchanged. For example, cast iron scraps can be used instead of cast pig iron after forming. With regard to castings made of special raw materials, it means more to retract.


     5. The horizontal waste paper baler can also appropriately schedule the length of the belt according to the dimensions of the packaged parts to ensure that the input of the packaging belt meets the length required for one round of the package to be packaged. Clockwise rotation can lengthen the belt. Length, otherwise it is easy to have work defects.


  6. Put the parts to be packed on the mission table, take out the packing tape that was input before, and loop around the parts to be packed, and then pull out the micro switch in the notch motor.