The strapping machine is also called strapping machine, strapping machine or strapping machine. It uses strapping tape to bind products or packages, then tighten and combine the two ends with a heating iron. The function of the baler is to reinforce the packaged goods, so that the goods will not be scattered due to inadequate binding during transportation and storage, and should be tied neatly and beautifully. The hydraulic baler includes a bracket, the bracket has a bottom plate and front and rear side baffles, the bracket is equipped with a jack, the jack has a piston rod, the right end of the piston rod is connected with a vertical pusher plate, and the right side of the pusher plate is connected with a pusher Slats, the gap between adjacent pusher slats is a rope groove on the board;
The upper right part of the bracket is equipped with a pressing material upper baffle, and the bracket on the left side of the pressing material upper baffle has a feed inlet; the brackets on the right side of the front and rear side baffles are respectively fixedly connected with front and rear side barriers, and adjacent side barriers The gap between the strips is a rope threading port; the right end of the bracket has a discharge port, the right end of the bracket at the discharge port is hinged with a door panel, the left side of the door panel is connected with a door slat, and the gap between adjacent door slats is for the door Rope groove; the cavity enclosed by the front and rear side baffles, the pusher plate and the bottom plate is the feeding cavity, and the cavity enclosed by the front and rear side baffles, the pressing upper baffle, the door panel and the bottom plate is the squeezing cavity; the door panel and the bracket A locking device is fixedly connected to the right end. And the size of the package can be adjusted within a certain range as required.