Introduction: The cooling system of the machine is divided into two types: water cooling and air cooling. Both cooling systems have their advantages and disadvantages. In view of the practical operating environment of the horizontal waste paper baler, we usually choose the water cooling system. Air cooling means that the wind blown by an electric fan transfers heat to the heat sink, and then achieves a cooling effect. Air cooling is usually noisy, and it is inconvenient to repair, easy to be disturbed by dust, and the heat dissipation effect is not very good. Its advantage is that the price is relatively cheap.
Continuous friction in the operation of machinery will bring about the phenomenon of mechanical equipment parts wear (a basic type of component failure). The waste paper baler will cause wear due to constant friction during operation. I will show you that these are all This is a normal phenomenon. Don’t panic. Here are a few things:
1. Normal wear
The wear and tear of the automatic waste paper baler within the allowable design stipulated by the design becomes the normal wear and tear of the waste paper baler. This kind of wear is generally in the initial stage. Due to the roughness of the new friction surface, the real contact surface is small and the wear is relatively fast. This is the so-called running and phase. As the surface is gradually flattened and the real contact area, the waste paper baler gradually enters a normal and stable wear stage, and the friction surface wears slightly and slowly and stably.
2. Adhesive wear
This kind of wear refers to the phenomenon that the material of the contact surface transfers from one surface to another surface due to solid phase welding at the actual contact point, which is called adhesive wear. Mineral water bottle packing machine This product has the characteristics of good rigidity, toughness and stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment basic engineering. It is widely used in all kinds of waste paper factories, waste recycling companies and other units and enterprises. It is suitable for the packaging and recycling of waste paper, plastic straw, etc. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs. When solid phase welding occurs in the waste paper baler, the temperature at the real contact point may or may not be the melting point.
The waste paper baler is used to squeeze waste paper and similar products under normal conditions, so that the volume is greatly reduced, so as to achieve the purpose of reducing transportation volume, saving freight, and increasing benefits for enterprises. The working principle of the waste paper baler is to complete the baling by tightening, hot melting, cutting and bonding. The equipment produced by the packing machine manufacturer can be used for packing regardless of the size of the packaging, without adjusting the machine. The packing machine is a mechanical structure, some of which use packing parts, the back blade is stable, the adjustment is convenient, and the packer is at a reasonable price. It is also suitable for the bundling of wooden box packaging products.
The cooling system of this machine is divided into two types: water cooling and air cooling. Both cooling systems have their advantages and disadvantages. In view of the practical operating environment of the horizontal waste paper baler, we usually choose the water cooling system. The waste paper baler is used to squeeze waste paper and similar products under normal conditions, and pack them with special packaging tapes to greatly reduce the volume, so as to reduce transportation volume, save freight, and increase benefits for enterprises. The introduction of advanced technology and advanced technology of similar products at home and abroad. There are 4 sets of feeding devices for the scrap metal baler, each of which corresponds to a baling head. Each set includes a baling line conveying device and a baling line reverse tension device. The main rail seat of the waste paper hydraulic baler is mainly composed of two wear-resistant steel rails on the surface. The wheels of the compression frame are guided to run along the outer sides of the two tracks, and hydraulic cylinders that push the compression frame to operate are arranged in them. In addition, there is a complete set of hydraulic stations in addition to mechanical components. It can be seen from the above description that various movements of the waste paper hydraulic baler are completed by fluid power. Air cooling means that the wind blown by an electric fan transfers heat to the heat sink, and then achieves a cooling effect. Air cooling is usually noisy, and it is inconvenient to repair, easily disturbed by dust, and its heat dissipation effect is not very good. Its advantage is that the price is relatively cheap.