Home > News > Content

​What Are The Requirements For Using Oil In The Waste Paper Baler?

Feb 03, 2021

   Using waste paper baler technology, it is designed as a dual-loop control of the whole machine, which is more stable and reliable than the previous single-loop control performance. The dual-loop control reduces the internal load of the machine board, and the operation of each circuit between the baler structure is more stable and stable. The waste paper baler has good toughness and stability, and is characterized by beautiful and generous shape and low equipment cost. The use of the baler design can not only greatly reduce the output of labor costs, but also greatly increase the total production per unit time and improve the production capacity of the product. The reason why the baler is more popular with users is its strong production capacity and safe manufacturing operation mode, different sanitary products, and the flexibility of the baler is better than similar equipment, and it can meet different needs.

   In areas that require fire protection, oil has a high ignition point; in cold climates, oil has a lower freezing point. Oil is not easily oxidized to avoid the formation of colloids and asphaltenes due to oxidation, which will cause oil changes. Impurities formed by oxides can also block the oil circuit and impair the normal operation of the hydraulic system. The waste paper baler has no effect on human health. Clean quality, no impurities. If there is moisture, it will reduce the smooth function of the waste paper baler oil; mechanical impurities will block the orifices and the valve core will be stuck; acids and alkalis will corrode the metal and damage the sealing structure; volatile substances will change the grease and cause bubbles, which will Damage the smoothness of the transmission.

   In the hydraulic system of the waste paper baler, the working fluid is not only used to transfer energy, but also to smooth the conflicting surface of the hydraulic components. In some machine tools, the smoothing system oil source of the machine tool comes from the hydraulic system, and the hydraulic system uses the same oil pump to supply oil. Therefore, hydraulic oil should have high oil film strength and smooth function within the range of working temperature and pressure to avoid dry conflict.