Home > News > Content

What Are The Solutions To The Reasons For The Abnormal Pressure Of The Waste Paper Hydraulic Baler

Jan 05, 2021

 According to the gradual increase in our national environmental protection awareness, we are using more and more waste paper hydraulic balers. However, when the waste paper hydraulic baler is working, sometimes the pressure of the waste paper hydraulic baler is abnormal. This situation is mainly due to the clogging of the oil filter, the low viscosity of the system oil, and insufficient motor power (referring to how much work an object does in a unit time). Next, Germany and China will explain to you the waste paper What are the solutions to the causes of abnormal pressure on the baler? The compression frame of the mineral water bottle packing machine is basically similar in structure to the compression frame, but there are 4 packing heads and 1 set of thread feeding device arranged on it. The packing heads of the waste paper hydraulic baler (4 in total) are the most complicated parts of the whole equipment and the most chained actions. The packing heads of each waste paper hydraulic baler have exactly the same structure and can be interchanged.


1. The main reasons for the abnormal pressure of the waste paper hydraulic baler are as follows: 1. The oil filter is blocked, the fluid flow channel is too small, and the oil viscosity is too high to suck the oil. Mineral water bottle packing machine This product has the characteristics of good rigidity, toughness and stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment basic engineering. It is widely used in all kinds of waste paper factories, waste recycling companies and other units and enterprises. It is suitable for the packaging and recycling of waste paper, plastic straw, etc. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs. 2. The system oil viscosity is too low and the leakage is serious. Excessive air in the oil, and serious infection. 3. The motor power (referring to how much work the object does in a unit time) is insufficient, and the speed is too low. The pipeline is connected incorrectly. The pressure gauge is damaged.

2. Countermeasures to solve the abnormal pressure of the waste paper hydraulic baler: 1. When installing and debugging the hydraulic pump of the waste paper baler, you must carefully read the operating instructions and strictly implement the installation and commissioning process requirements. The automatic waste paper baler is a mechatronic product, mainly composed of mechanical systems, control systems, feeding systems and power systems. The whole packing process consists of auxiliary time such as pressing, returning, carrying, transferring, outgoing up, outgoing down, and receiving. Confirm the suction and discharge ports of the pump, and be sure to fill the pump with hydraulic oil before starting the hydraulic pump. The oil inlet and outlet ports of the hydraulic pump must be well sealed and must not leak or enter air. If it is confirmed whether there is air ingress, grease the sealing part to see if the noise of the pump is significantly reduced to determine whether there is air ingress during pump operation. 2. When assembling the hydraulic pump for the waste paper hydraulic baler, it is necessary to implement the cleaning and assembly process regulations. For example, the blades in the vane pump must not be installed backwards, and the movement must be flexible. After the blades are oiled, they can automatically fall into the rotor groove by their own weight. . The processing, storage and transportation of the parts in the pump must strictly comply with the drawings and various technological requirements, and the inspection system must be strictly inspected before assembly. Unqualified parts cannot be installed on the pump. If the parts in the pump are damaged, replace them with new ones if they cannot be repaired. Especially the seals, which are defective, must be replaced with new ones. The above is the solution to the abnormal pressure of the waste paper hydraulic baler. The quality of the waste paper hydraulic baler is high-quality, the equipment is reliable and trustworthy. The professional manufacturer of the waste paper hydraulic baler welcomes all walks of life to investigate and inquire, intelligent manufacturing, and trustworthy.