When we use the automatic waste paper baler, the verification method to diagnose and deal with the fault is to find out whether the equipment can operate normally, so as to ensure the normal and stable operation of the automatic hydraulic waste paper baler during the operation. Technical means also restrict or facilitate practical work. Therefore, when troubleshooting, we should try our best to meet the following precautions.
One thing is to ensure the correct conclusion. If the correct cause of the failure cannot be found, the failure cannot be eliminated. Therefore, the correct diagnosis conclusion is whether the automatic waste paper baler can return to normal.
The second point is that the accuracy of the conclusion should be guaranteed. Only when the data conclusion is very accurate, can the time and energy used to eliminate the fault be eliminated, and some common faults of the automatic waste paper baler can be prevented as early as possible. Therefore, we should analyze the failure of the automatic waste paper baler.
The third point is to ensure that the conclusions are simple and applicable. As there are many factors at the work site, but the accuracy and complexity of the instrument are not applicable, and the price is relatively expensive, we need to adopt a relatively simple and effective way to deal with the problem of automatic hydraulic waste. Packer.
The fourth point is that you need to be fast. Time is life. The key is that the hydraulic shutdown of the fully automatic waste paper baler will cause the entire workshop and even the entire production line to stop running. The problem must be solved and solved every second.
fifth. Failure analysis personnel should have a strong enterprising spirit. Relying on the ability of rapid judgment, when the fault is in the budding state, the problem can be found and effective measures can be taken to solve it.