Home > News > Content

Why Are Some Vertical Waste Paper Balers Easy To Break? Are They All Product Equipment Quality Slag?

Dec 23, 2020

Guide: If the working environment of the vertical waste paper baler cannot be changed objectively, it is recommended that customers pay attention to the corrosion resistance of the shell of the semi-automatic vertical baler, the material and thickness of the shell, and the Before and after the use of the vertical baler, the baler should generally be cleaned and maintained.


    Vertical waste paper baler is no stranger to the market, and the appearance is increasing, and the appearance is also uneven. The structure of the compression frame of the mineral water bottle packing machine is basically similar to that of the compression frame, but there are 4 packing heads and 1 set of thread feeding device arranged on it. The packing heads of the waste paper hydraulic baler (4 in total) are the most complicated parts of the whole equipment and the most chained actions. The packing heads of each hydraulic waste paper baler have exactly the same structure and can be interchanged. But why are some vertical balers so easy to break?

  In fact, the environment also influences the product performance. Some customers operate and control the vertical baler in a nasty space, and analyze the impact on the vertical baler under the harsh environment:

  

   1. Severely humid environment. There are a lot of factories that produce aquatic products. The air humidity is relatively high, and the water on the ground is deep. At this time, choose an ordinary semi-automatic baler. First, the machine itself will be easily damaged, and then the strapping When unwinding the belt, the belt will fall to the ground and it will not be smooth when you work again.

  

  2, a more corrosive environment. The lead frame of the automatic waste paper baler is composed of 4 sets of wire devices installed on a frame. The entire lead frame is suspended on a central axis of the compression frame, and moves horizontally relative to the compression frame under the action of a hydraulic motor. The compression frame is a welded component, and the bottom is equipped with wheels, which can move horizontally along the main slide rail under the push of a hydraulic cylinder. The lifting platform is mainly formed by bolting two horizontal beams, and the lifting platform can move up and down in the vertical direction under the push of two hydraulic cylinders. This environment is mainly manifested as strong acid or strong base. Since the outer casing of carbon steel is not as corrosion-resistant as stainless steel (stainless and acid-resistant steel), the casing is easily corroded in such an environment.

     If the working environment of the vertical waste paper baler cannot be changed objectively, it is recommended that customers pay attention to the corrosion resistance of the shell of the semi-automatic vertical baler, the material and thickness of the shell, and the use of vertical baler. During the time period before and after the balers, the balers are generally cleaned and maintained. The structure of the compression frame of the mineral water bottle packing machine is basically similar to that of the compression frame, but there are 4 packing heads and 1 set of thread feeding device arranged on it. The packing heads of the waste paper hydraulic baler (4 in total) are the most complicated parts of the whole equipment and the most chained actions. The packing heads of each hydraulic waste paper baler have exactly the same structure and can be interchanged.